Merge branch 'master' of ssh://tetalab.org:2213/tTh/DD2-monitor

Je merge, donc je suis.
This commit is contained in:
tth 2018-12-12 18:33:16 +01:00
commit 933365b883
6 changed files with 169 additions and 2 deletions

2
.gitignore vendored
View File

@ -1,7 +1,7 @@
a.out a.out
*.o *.o
fake-values fake-values
essai essai serial/t
doc/*.toc doc/*.log doc/*.aux doc/*.pdf doc/*.toc doc/*.log doc/*.aux doc/*.pdf

9
serial/Makefile Normal file
View File

@ -0,0 +1,9 @@
serial.o: serial.c serial.h Makefile
gcc -Wall -c $<
t: t.c serial.o Makefile
gcc -Wall $< serial.o -o $@

View File

@ -1,8 +1,20 @@
# Serial Input # Serial Input
But premier de ce module : recevoir les données fournies par l'automate But premier de ce module : recevoir les données fournies par l'automate
de contrôle du phytotron. de contrôle du phytotron.
Ayant déja pratiqué ce genre de chose pour un déja ancien
[projet](http://art.dinorama.fr/bdf/)
avec _MadPhoenix_, je me propose de reprendre quelques parties de ce code,
de le remettre au gout du jour et de le tester dès que possible.

117
serial/serial.c Normal file
View File

@ -0,0 +1,117 @@
#include <stdio.h>
#include <stdlib.h>
#include <unistd.h> //Used for UART
#include <fcntl.h> //Used for UART
#include <termios.h> //Used for UART
#include "serial.h"
/* -------------------------------------------------------------------- */
static int baudrate2const(int bauds)
{
int br;
switch (bauds)
{
case 1200: br = B1200; break;
case 2400: br = B2400; break;
case 4800: br = B4800; break;
case 9600: br = B9600; break;
case 19200: br = B19200; break;
case 38400: br = B38400; break;
case 57600: br = B57600; break;
case 115200: br = B115200; break;
default:
fprintf(stderr, "baudrate %d invalide\n", bauds);
exit(1);
break;
}
return br;
}
/* -------------------------------------------------------------------- */
int prepare_UART(char *port, int baudrate)
{
int uart0 = -1;
int baudbits;
struct termios options;
#if DEBUG_LEVEL
fprintf(stderr, "%s ( %s %d )\n", __func__, port, baudrate);
#endif
// OPEN THE UART
// The flags (defined in fcntl.h):
// Access modes (use 1 of these):
// O_RDONLY - Open for reading only.
// O_RDWR - Open for reading and writing.
// O_WRONLY - Open for writing only.
//
// O_NDELAY / O_NONBLOCK (same function) - Enables nonblocking mode.
// When set read requests on the file can return immediately with a
// failure status
// if there is no input immediately available (instead of blocking).
// Likewise, write requests can also return
// immediately with a failure status if the output can't be written
// immediately.
//
// O_NOCTTY - When set and path identifies a terminal device, open()
// shall not cause the terminal device to become the controlling terminal
// for the process.
uart0 = open(port, O_RDWR | O_NOCTTY);
if (uart0== -1)
{
perror("unable to open uart ");
return -1;
}
// CONFIGURE THE UART
// The flags defined in /usr/include/termios.h -
// see http://pubs.opengroup.org/onlinepubs/007908799/xsh/termios.h.html
// Baud rate:- B1200, B2400, B4800, B9600, B19200, B38400, B57600,
// B115200, B230400, B460800, B500000, B576000, B921600, B1000000,
// B1152000, B1500000, B2000000, B2500000, B3000000, B3500000, B4000000
// CSIZE:- CS5, CS6, CS7, CS8
// CLOCAL - Ignore modem status lines
// CREAD - Enable receiver
// IGNPAR = Ignore characters with parity errors
// ICRNL - Map CR to NL on input (Use for ASCII comms where you want
// to auto correct end of line characters - don't use for bianry comms!)
// PARENB - Parity enable
// PARODD - Odd parity (else even)
baudbits = baudrate2const(baudrate);
#if DEBUG_LEVEL
fprintf(stderr, "%d -> %x\n", baudrate, baudbits);
#endif
tcgetattr(uart0, &options);
options.c_cflag = baudbits | CS8 | CLOCAL | CREAD; //<Set baud rate
options.c_iflag = IGNPAR;
options.c_oflag = 0;
options.c_lflag = 0;
tcflush(uart0, TCIFLUSH);
tcsetattr(uart0, TCSANOW, &options);
return uart0;
}
/* -------------------------------------------------------------------- */
/*
* maybe we have to check for timeout ?
*/
int getbyte(int fd)
{
unsigned char byte;
int foo;
foo = read(fd, &byte, 1);
if (1 != foo)
{
perror("read a byte");
return -1;
}
return (int)byte;
}
/* -------------------------------------------------------------------- */

8
serial/serial.h Normal file
View File

@ -0,0 +1,8 @@
/*
* serial.h
*/
int prepare_UART(char *port, int bauds);
int getbyte(int fd);

21
serial/t.c Normal file
View File

@ -0,0 +1,21 @@
#include <stdio.h>
#include "serial.h"
int main (int argc, char *argv[])
{
int serial_in;
int byte, foo;
serial_in = prepare_UART("/dev/ttyS0", 9600);
fprintf(stderr, "prepare uart -> %d\n", serial_in);
for (foo=0; foo<20; foo++) {
byte = getbyte(serial_in);
printf("%6d %02x\n", foo, byte);
}
return 0;
}