binary hero by phil

Hardware part

+5V-------------------------------------------------- | | | | | | | |
| | | | | | | |
+-/ + / + / + / + / + / + / + /
/ / / / / / / /
/ / / / / / / /
| | | | | | | |
+-D2 +-D3 +-D4 +-D5 +-D6 +-D7 +-D10 +-D11
| | | | | | | |
- - - - - - - -
|R| |R| |R| |R| |R| |R| |R| |R|
|1| |1| |1| |1| |1| |1| |1| |1|
- - - - - - - -
| | | | | | | |
| | | | | | | |
GND--------------------------------------------------

+5V------------------------------------ | | | | | |
| | | | | |
+-/ +-/ + / + / + / + /
[--/ / / / / /
/ / / / / /
| | | | | |
+-D12 +-D13 +-A0 +-A1 +-A2 +-A3
| | | | | |
- - - - - -
|R| |R| |R| |R| |R| |R|
|1| |1| |1| |1| |1| |1|
- - - - - -
| | | | | |
| | | | | |
GND------------------------------------

D8-| D8-| | | _ _ \ / \ / - - | | - -
|R| |R|
|2| |3|
- - | | | | --------- | |---- | | | - | |R| | |4| | - | | | |----->To Gnd To To RCA RCA Pin GND

---

Pin| Role |Information |

---

D2 |Bit 2^0 |NC switch | D3 |Bit 2^1 |NO switch |
D4 |Bit 2^2 |NO switch |
D5 |Bit 2^3 |NO switch |
D6 |Bit 2^4 |NO switch |
D7 |Bit 2^5 |NO switch |
D8 |Tvout Video | | D9 |Tvout Sync | | D10|Bit 2^6 |NO switch | D11|Bit 2^7 |NO switch | D12|Help button |NC switch | D13|Pap button |NC button | A0 |nb bits select|NO switch | A1 |nb bits select|NO switch | A2 |speed select |NO switch | A3 |speed select |NO switch |

---

NO = Normaly open NC = Normaly close

R1 = 10 Kohms R2 = 330 ohms R3 = 1 Kohms R4 = 75 ohms For leds I use basic red leds (I suppose you can use basic signal diode, but I haven't make the test...)

You need TVout lib on http://code.google.com/p/arduino-tvout/downloads/list