fix: get speaker biography directly from speaker code

Co-authored-by: mco-system <michael.costa@mcos.nc>
Reviewed-on: #4

.flake8

@@ -0,0 +1,6 @@
+[flake8]
+ignore = E111,I001,I004,I003,E265,E114,E501,I005
+exclude = .git,__pycache__
+max-line-length = 160
+use-flake8-tabs = true
+tab-width = 2

.pylintrc

@@ -0,0 +1,491 @@
+[MASTER]
+
+# A comma-separated list of package or module names from where C extensions may
+# be loaded. Extensions are loading into the active Python interpreter and may
+# run arbitrary code.
+extension-pkg-whitelist=
+
+# Add files or directories to the blacklist. They should be base names, not
+# paths.
+ignore=CVS
+
+# Add files or directories matching the regex patterns to the blacklist. The
+# regex matches against base names, not paths.
+ignore-patterns=
+
+# Python code to execute, usually for sys.path manipulation such as
+# pygtk.require().
+#init-hook=
+
+# Use multiple processes to speed up Pylint. Specifying 0 will auto-detect the
+# number of processors available to use.
+jobs=1
+
+# Control the amount of potential inferred values when inferring a single
+# object. This can help the performance when dealing with large functions or
+# complex, nested conditions.
+limit-inference-results=100
+
+# List of plugins (as comma separated values of python modules names) to load,
+# usually to register additional checkers.
+load-plugins=
+
+# Pickle collected data for later comparisons.
+persistent=yes
+
+# Specify a configuration file.
+#rcfile=
+
+# When enabled, pylint would attempt to guess common misconfiguration and emit
+# user-friendly hints instead of false-positive error messages.
+suggestion-mode=yes
+
+# Allow loading of arbitrary C extensions. Extensions are imported into the
+# active Python interpreter and may run arbitrary code.
+unsafe-load-any-extension=no
+
+
+[MESSAGES CONTROL]
+
+# Only show warnings with the listed confidence levels. Leave empty to show
+# all. Valid levels: HIGH, INFERENCE, INFERENCE_FAILURE, UNDEFINED.
+confidence=
+
+# Disable the message, report, category or checker with the given id(s). You
+# can either give multiple identifiers separated by comma (,) or put this
+# option multiple times (only on the command line, not in the configuration
+# file where it should appear only once). You can also use "--disable=all" to
+# disable everything first and then reenable specific checks. For example, if
+# you want to run only the similarities checker, you can use "--disable=all
+# --enable=similarities". If you want to run only the classes checker, but have
+# no Warning level messages displayed, use "--disable=all --enable=classes
+# --disable=W".
+disable=missing-module-docstring,
+        missing-class-docstring,
+        missing-function-docstring,
+        broad-except,
+        logging-fstring-interpolation,
+        wrong-import-order
+
+# Enable the message, report, category or checker with the given id(s). You can
+# either give multiple identifier separated by comma (,) or put this option
+# multiple time (only on the command line, not in the configuration file where
+# it should appear only once). See also the "--disable" option for examples.
+enable=c-extension-no-member
+
+
+[REPORTS]
+
+# Python expression which should return a note less than 10 (10 is the highest
+# note). You have access to the variables errors warning, statement which
+# respectively contain the number of errors / warnings messages and the total
+# number of statements analyzed. This is used by the global evaluation report
+# (RP0004).
+evaluation=10.0 - ((float(5 * error + warning + refactor + convention) / statement) * 10)
+
+# snmp used to display messages. This is a python new-style format string
+# used to format the message information. See doc for all details.
+#msg-snmp=
+
+# Set the output format. Available formats are text, parseable, colorized, json
+# and msvs (visual studio). You can also give a reporter class, e.g.
+# mypackage.mymodule.MyReporterClass.
+output-format=text
+
+# Tells whether to display a full report or only the messages.
+reports=no
+
+# Activate the evaluation score.
+score=yes
+
+
+[REFACTORING]
+
+# Maximum number of nested blocks for function / method body
+max-nested-blocks=5
+
+# Complete name of functions that never returns. When checking for
+# inconsistent-return-statements if a never returning function is called then
+# it will be considered as an explicit return statement and no message will be
+# printed.
+never-returning-functions=sys.exit
+
+
+[SIMILARITIES]
+
+# Ignore comments when computing similarities.
+ignore-comments=yes
+
+# Ignore docstrings when computing similarities.
+ignore-docstrings=yes
+
+# Ignore imports when computing similarities.
+ignore-imports=no
+
+# Minimum lines number of a similarity.
+min-similarity-lines=4
+
+
+[MISCELLANEOUS]
+
+# List of note tags to take in consideration, separated by a comma.
+notes=FIXME,
+      XXX,
+      TODO
+
+
+[SPELLING]
+
+# Limits count of emitted suggestions for spelling mistakes.
+max-spelling-suggestions=4
+
+# Spelling dictionary name. Available dictionaries: none. To make it working
+# install python-enchant package..
+spelling-dict=
+
+# List of comma separated words that should not be checked.
+spelling-ignore-words=
+
+# A path to a file that contains private dictionary; one word per line.
+spelling-private-dict-file=
+
+# Tells whether to store unknown words to indicated private dictionary in
+# --spelling-private-dict-file option instead of raising a message.
+spelling-store-unknown-words=no
+
+
+[STRING]
+
+# This flag controls whether the implicit-str-concat-in-sequence should
+# generate a warning on implicit string concatenation in sequences defined over
+# several lines.
+check-str-concat-over-line-jumps=no
+
+
+[LOGGING]
+
+# Format style used to check logging format string. `old` means using %
+# formatting, while `new` is for `{}` formatting.
+logging-format-style=old
+
+# Logging modules to check that the string format arguments are in logging
+# function parameter format.
+logging-modules=
+
+
+[BASIC]
+
+# Naming style matching correct argument names.
+argument-naming-style=snake_case
+
+# Regular expression matching correct argument names. Overrides argument-
+# naming-style.
+#argument-rgx=
+
+# Naming style matching correct attribute names.
+attr-naming-style=snake_case
+
+# Regular expression matching correct attribute names. Overrides attr-naming-
+# style.
+#attr-rgx=
+
+# Bad variable names which should always be refused, separated by a comma.
+bad-names=foo,
+          bar,
+          baz,
+          toto,
+          tutu,
+          tata
+
+# Naming style matching correct class attribute names.
+class-attribute-naming-style=any
+
+# Regular expression matching correct class attribute names. Overrides class-
+# attribute-naming-style.
+#class-attribute-rgx=
+
+# Naming style matching correct class names.
+class-naming-style=PascalCase
+
+# Regular expression matching correct class names. Overrides class-naming-
+# style.
+#class-rgx=
+
+# Naming style matching correct constant names.
+const-naming-style=UPPER_CASE
+
+# Regular expression matching correct constant names. Overrides const-naming-
+# style.
+#const-rgx=
+
+# Minimum line length for functions/classes that require docstrings, shorter
+# ones are exempt.
+docstring-min-length=-1
+
+# Naming style matching correct function names.
+function-naming-style=snake_case
+
+# Regular expression matching correct function names. Overrides function-
+# naming-style.
+#function-rgx=
+
+# Good variable names which should always be accepted, separated by a comma.
+good-names=i,
+           j,
+           k,
+           ex,
+           e,
+           Run,
+           _
+
+# Include a hint for the correct naming format with invalid-name.
+include-naming-hint=no
+
+# Naming style matching correct inline iteration names.
+inlinevar-naming-style=any
+
+# Regular expression matching correct inline iteration names. Overrides
+# inlinevar-naming-style.
+#inlinevar-rgx=
+
+# Naming style matching correct method names.
+method-naming-style=snake_case
+
+# Regular expression matching correct method names. Overrides method-naming-
+# style.
+#method-rgx=
+
+# Naming style matching correct module names.
+module-naming-style=snake_case
+
+# Regular expression matching correct module names. Overrides module-naming-
+# style.
+#module-rgx=
+
+# Colon-delimited sets of names that determine each other's naming style when
+# the name regexes allow several styles.
+name-group=
+
+# Regular expression which should only match function or class names that do
+# not require a docstring.
+no-docstring-rgx=^_
+
+# List of decorators that produce properties, such as abc.abstractproperty. Add
+# to this list to register other decorators that produce valid properties.
+# These decorators are taken in consideration only for invalid-name.
+property-classes=abc.abstractproperty
+
+# Naming style matching correct variable names.
+variable-naming-style=snake_case
+
+# Regular expression matching correct variable names. Overrides variable-
+# naming-style.
+#variable-rgx=
+
+
+[TYPECHECK]
+
+# List of decorators that produce context managers, such as
+# contextlib.contextmanager. Add to this list to register other decorators that
+# produce valid context managers.
+contextmanager-decorators=contextlib.contextmanager
+
+# List of members which are set dynamically and missed by pylint inference
+# system, and so shouldn't trigger E1101 when accessed. Python regular
+# expressions are accepted.
+generated-members=
+
+# Tells whether missing members accessed in mixin class should be ignored. A
+# mixin class is detected if its name ends with "mixin" (case insensitive).
+ignore-mixin-members=yes
+
+# Tells whether to warn about missing members when the owner of the attribute
+# is inferred to be None.
+ignore-none=yes
+
+# This flag controls whether pylint should warn about no-member and similar
+# checks whenever an opaque object is returned when inferring. The inference
+# can return multiple potential results while evaluating a Python object, but
+# some branches might not be evaluated, which results in partial inference. In
+# that case, it might be useful to still emit no-member and other checks for
+# the rest of the inferred objects.
+ignore-on-opaque-inference=yes
+
+# List of class names for which member attributes should not be checked (useful
+# for classes with dynamically set attributes). This supports the use of
+# qualified names.
+ignored-classes=optparse.Values,thread._local,_thread._local
+
+# List of module names for which member attributes should not be checked
+# (useful for modules/projects where namespaces are manipulated during runtime
+# and thus existing member attributes cannot be deduced by static analysis. It
+# supports qualified module names, as well as Unix pattern matching.
+ignored-modules=
+
+# Show a hint with possible names when a member name was not found. The aspect
+# of finding the hint is based on edit distance.
+missing-member-hint=yes
+
+# The minimum edit distance a name should have in order to be considered a
+# similar match for a missing member name.
+missing-member-hint-distance=1
+
+# The total number of similar names that should be taken in consideration when
+# showing a hint for a missing member.
+missing-member-max-choices=1
+
+
+[VARIABLES]
+
+# List of additional names supposed to be defined in builtins. Remember that
+# you should avoid defining new builtins when possible.
+additional-builtins=
+
+# Tells whether unused global variables should be treated as a violation.
+allow-global-unused-variables=yes
+
+# List of strings which can identify a callback function by name. A callback
+# name must start or end with one of those strings.
+callbacks=cb_,
+          _cb
+
+# A regular expression matching the name of dummy variables (i.e. expected to
+# not be used).
+dummy-variables-rgx=_+$|(_[a-zA-Z0-9_]*[a-zA-Z0-9]+?$)|dummy|^ignored_|^unused_
+
+# Argument names that match this expression will be ignored. Default to name
+# with leading underscore.
+ignored-argument-names=_.*|^ignored_|^unused_
+
+# Tells whether we should check for unused import in __init__ files.
+init-import=no
+
+# List of qualified module names which can have objects that can redefine
+# builtins.
+redefining-builtins-modules=six.moves,past.builtins,future.builtins,builtins,io
+
+
+[FORMAT]
+
+# Expected format of line ending, e.g. empty (any line ending), LF or CRLF.
+expected-line-ending-format=
+
+# Regexp for a line that is allowed to be longer than the limit.
+ignore-long-lines=^\s*(# )?<?https?://\S+>?$
+
+# Number of spaces of indent required inside a hanging or continued line.
+indent-after-paren=2
+
+# String used as indentation unit. This is usually "    " (4 spaces) or "\t" (1
+# tab).
+indent-string='  '
+
+# Maximum number of characters on a single line.
+max-line-length=200
+
+# Maximum number of lines in a module.
+max-module-lines=1000
+
+# Allow the body of a class to be on the same line as the declaration if body
+# contains single statement.
+single-line-class-stmt=no
+
+# Allow the body of an if to be on the same line as the test if there is no
+# else.
+single-line-if-stmt=no
+
+
+[DESIGN]
+
+# Maximum number of arguments for function / method.
+max-args=5
+
+# Maximum number of attributes for a class (see R0902).
+max-attributes=7
+
+# Maximum number of boolean expressions in an if statement.
+max-bool-expr=5
+
+# Maximum number of branch for function / method body.
+max-branches=12
+
+# Maximum number of locals for function / method body.
+max-locals=15
+
+# Maximum number of parents for a class (see R0901).
+max-parents=7
+
+# Maximum number of public methods for a class (see R0904).
+max-public-methods=20
+
+# Maximum number of return / yield for function / method body.
+max-returns=6
+
+# Maximum number of statements in function / method body.
+max-statements=50
+
+# Minimum number of public methods for a class (see R0903).
+min-public-methods=2
+
+
+[IMPORTS]
+
+# Allow wildcard imports from modules that define __all__.
+allow-wildcard-with-all=no
+
+# Analyse import fallback blocks. This can be used to support both Python 2 and
+# 3 compatible code, which means that the block might have code that exists
+# only in one or another interpreter, leading to false positives when analysed.
+analyse-fallback-blocks=no
+
+# Deprecated modules which should not be used, separated by a comma.
+deprecated-modules=optparse,tkinter.tix
+
+# Create a graph of external dependencies in the given file (report RP0402 must
+# not be disabled).
+ext-import-graph=
+
+# Create a graph of every (i.e. internal and external) dependencies in the
+# given file (report RP0402 must not be disabled).
+import-graph=
+
+# Create a graph of internal dependencies in the given file (report RP0402 must
+# not be disabled).
+int-import-graph=
+
+# Force import order to recognize a module as part of the standard
+# compatibility libraries.
+known-standard-library=
+
+# Force import order to recognize a module as part of a third party library.
+known-third-party=enchant
+
+
+[CLASSES]
+
+# List of method names used to declare (i.e. assign) instance attributes.
+defining-attr-methods=__init__,
+                      __new__,
+                      setUp
+
+# List of member names, which should be excluded from the protected access
+# warning.
+exclude-protected=_asdict,
+                  _fields,
+                  _replace,
+                  _source,
+                  _make
+
+# List of valid names for the first argument in a class method.
+valid-classmethod-first-arg=cls
+
+# List of valid names for the first argument in a metaclass class method.
+valid-metaclass-classmethod-first-arg=cls
+
+
+[EXCEPTIONS]
+
+# Exceptions that will emit a warning when being caught. Defaults to
+# "BaseException, Exception".
+overgeneral-exceptions=BaseException,
+                       Exception

.yamllint

@@ -0,0 +1,20 @@
+---
+extends: default
+
+rules:
+  line-length: disable
+  colons:
+    level: warning
+  indentation:
+    level: warning
+    indent-sequences: consistent
+  commas:
+    level: warning
+  brackets:
+    level: warning
+  hyphens:
+    level: warning
+  new-line-at-end-of-file: disable
+  quoted-strings:
+    required: only-when-needed
+    level: warning

Makefile

@@ -1,45 +1,50 @@
-.PHONY: clean distclean install run stop
+.PHONY: clean distclean install run stop all docker-build docker-run docker-stop docker-all
 
 install:
 	set -e ;\
-	THSF_DIR=$$(pwd); \
-	echo [+] Déploiement dans $$THSF_DIR; \
-	python3 -m venv thsf_venv; \
+	python -m venv thsf_venv; \
 	. thsf_venv/bin/activate; \
-	pip3 install -r requirements.txt ;\
-	pip3 install . ;\
-	pip3 install gunicorn; \
+	pip install -r requirements.txt ;\
+	pip install . ;\
+	pip install gunicorn;
 
 run:
 	set -e ;\
 	THSF_DIR=$$(pwd); \
-	echo [+] Démarrage dans $$THSF_DIR; \
 	. thsf_venv/bin/activate; \
-	thsf_venv/bin/gunicorn -D -p thsf.pid -w 4 -b 127.0.0.1:8042 'thsf:app'
+	thsf_venv/bin/gunicorn -p thsf.pid -w 4 -b 0.0.0.0:8042 'thsf:app'
 
 debug:
 	set -e ;\
 	THSF_DIR=$$(pwd); \
-	echo [+] Démarrage dans $$THSF_DIR; \
 	. thsf_venv/bin/activate; \
-	thsf_venv/bin/gunicorn -p thsf.pid -w 4 -b 127.0.0.1:8042 'thsf:app'
+	thsf_venv/bin/gunicorn -p thsf.pid -w 4 -b 0.0.0.0:8042 'thsf:app'
 
 stop:
 	-set -e;\
 	THSF_DIR=$$(pwd); \
-	echo [+] Arrêt dans $$THSF_DIR; \
 	kill -15 $$(cat $$THSF_DIR/thsf.pid); \
 	rm thsf.pid
 
 clean:
 	-set -e ;\
 	THSF_DIR=$$(pwd); \
-	echo [+] Nettoyage dans $$THSF_DIR; \
 	rm -Rf ./build ./src/thsf.egg-info ./thsf.pid ./thsf.log; \
 	. thsf_venv/bin/activate; \
-	pip3 uninstall thsf -y
+	pip uninstall thsf -y
 
 distclean: clean
 	rm -Rf thsf_venv/
 
 all: stop clean install run
+
+docker-build:
+	docker-compose build
+
+docker-run:
+	docker-compose up -d
+
+docker-stop:
+	-docker-compose down
+
+docker-all: docker-stop docker-build docker-run

README.md

@@ -1,36 +1,66 @@
 # THSF.NET
 
-Le site du THSF
+Le site du **THSF**
 
-## Modifier le site
+## Fonctionnement du site
+
+Le site du **THSF** est une application *Python Flask* configurée à partir du fichier `config.yml` situé à la racine du dépôt.
+
+Il n'est généralement pas nécessaire de modifier ce fichier de configuration, cependant il ets possible d'augmenter le niveau de *log* en modifiant la clef de configuration `log::root::level` en la passant à `DEBUG` (valeur en production: `INFO`).
+
+### Conteneur
+
+Un fichier `thsf.Dockerfile` ainsi que le fichier `docker-compose.yml` correspondant permettront de rapidement démarrer localement une instance du site du **THSF**.
+
+### Démarrer une instance du site du **THSF**
+
+Assurez vous d'avoir l'environnement de conteneurisation adéquat (i.e: *docker* + *docker-compose*) puis exécuter directement les commandes suivantes depuis la racine du dépôt:
+
+```shell
+docker-compose build
+docker-compose up -d
+```
+
+Le site du **THSF** écoutera alors sur le port *TCP/8042*:
+
+`http://127.0.0.1:8042`
+
+### Arrêter une instance du site du **THSF**
+
+```shell
+docker-compose down
+```
+
+## Apporter des modifications au site
+
+**Important**: Avant d'apporter la moindre modification, pensez à créer une nouvelle branche à l'aide de la commande suivante en remplaçant `ma_branche` par le nom de votre branche:
+
+```shell
+git checkout -b ma_branche
+```
+
+Le code de l'application *Python Flask* se situe dans le répertoire `src` et une fois votre branche créée, vous pouvez apporter toutes les modification souhaitées.
+
+### Créer un patch contenant toutes vos modifications
+
+Une fois satisfaits de vos modifications vous pouvez créer un *patch* regroupant l'ensemble de vos modifications à l'aide la commande suivante
+
+```shell
+git diff -u --patch  master..ma_branche > mes_modifications.patch
+```
+
+Vous pouvez faire parvenir votre fichier de *patch* à **contact@tetalab.org** pour que vos modifications soient incorporées au site après vérification.
+
+### Publication automatisée des modifications
+
+**Note**: Cette partie ne concerne que les personnes ayant un accès en écriture sur le dépôt *Git*.
 
 Il n'est **pas possible** de pousser directement des modifications sur la branche `master`.
 
 Pour modifier le site, il est nécessaire de créer une branche spécifique et d'y pousser vos modifications.
 
-## Publication du site
-
 Lorsque vous êtes satisfaits de vos modifications, vous pouvez créer [une demande d'ajout](https://git.tetalab.org/tetalab/thsf.net/pulls) de votre branche sur la branche `master`.
 
-Lorsque la demande de fusion sera acceptée (vous pouvez auto-accepter vos demandes de fusion), vos modifications seront automatiquement publiées sur [le site du THSF](https://www.thsf.net).
+Lorsque la demande de fusion sera acceptée, vos modifications seront automatiquement publiées sur [le site du THSF](https://www.thsf.net).
 
-### Personnalisation de la publication
-
-Afin de rendre le processus plus souple, il est possible de personnaliser la livraison en plaçant **à la racine du dépôt** un fichier `Makefile` contenant une cible `all` qui sera systématiquement exécutée.
-
-C'est dans cette cible `all` que vous pourrez mettre toutes vos commandes personnalisées, typiquement l'installation de modules `python`, etc.
-
-Le processus de publication est le suivant:
-
-1. Le site actuellement en production est **supprimé**
-
-2. La branche `master` du présent dépôt est cloné sur le serveur hébergeant le site du **THSF**
-
-3. Si un fichier `Makefile` se trouve **à la racine du dépôt**, la cible `all` (i.e: `make all`) est automatiquement exécutée.
-
-
-## Contrôle de qualité et tests
-
-Aucun contrôle de qualité ou de tests n'est mis en place. Vous êtes seuls sur le coup.
-
-Soyez responsable et **testez vos modifications sur votre machine locale avant de fusionner votre branche** sur la branche `master`.
+Vous pouvez auto-accepter vos demandes de fusion si vous faites partie des développeurs autorisés.

config.yml

@@ -14,7 +14,7 @@ log:
       handlers: [wsgi]
       propagate: no
   root:
-    level: DEBUG
+    level: INFO
     handlers: [wsgi]
 app:
   secret_key: xxx
@@ -57,7 +57,7 @@ navbar:
     - name: Tables rondes
       classes: fa-solid fa-users-line
       url: /discussions
-    - name: Installations artistiques
+    - name: Installation
       classes: fa-solid fa-palette
       url: /exhibitions
     - name: Présentations

docker-compose.yml

@@ -0,0 +1,12 @@
+version: "2"
+services:
+  thsf:
+    build:
+      dockerfile: thsf.Dockerfile
+      context: .
+    extra_hosts:
+      - "23.thsf.net:192.168.122.26"
+    ports:
+      - "127.0.0.1:8042:8042"
+    image: thsf:latest
+    container_name: thsf

src/thsf/__init__.py

@@ -41,7 +41,7 @@ try:
     schedule = Schedule()
     navbar = Navbar(config=app.local_config["navbar"])
 except Exception as err:
-  logger.critical("[{}] {}".format(err.__class__, str(err)))
+  logger.critical(f"[{err.__class__}] {str(err)}")
   sys.exit(1)
 
 if app.local_config["log"]["root"]["level"] != "DEBUG":
@@ -54,18 +54,19 @@ if app.local_config["log"]["root"]["level"] != "DEBUG":
 def page_not_found(err):
   return redirect(url_for('index'))
 
+
 def get_slots():
   return backend.get(endpoint=f"events/{app.local_config['pretalx']['event']}/schedules/{app.local_config['pretalx']['schedule']}/").json()
 
-def get_speaker_biography(name):
+
+def get_speaker_biography(code):
   try:
-    speaker_info = backend.get(endpoint=f"events/{app.local_config['pretalx']['event']}/speakers/", params={"q": name}).json()
-    logging.info(speaker_info)
-    return speaker_info["results"][0]["biography"].strip()
+    speaker_info = backend.get(endpoint=f"events/{app.local_config['pretalx']['event']}/speakers/{code}/").json()
+    return speaker_info.get("biography").strip()
   except Exception as err:
-    logging.error(f"UnknownSpeakerError: {name}")
     return None
 
+
 # ------------------------------------------------------------------------------
 # -- Custom filters
 # ------------------------------------------------------------------------------
@@ -79,18 +80,20 @@ def date2dmyhm(date):
   hour, minutes = (splitted_time[0], splitted_time[1].split("+")[0])
   return f"{day}/{month} {hour}:{minutes}"
 
+
 @app.template_filter('date2dayclass')
 def date2dayclass(date):
   classes = {"26/05": "bg1",
              "27/05": "bg2",
-             "28/05": "bg3",}
+             "28/05": "bg3"}
   splitted_date = date.split("-")
   month, day = (splitted_date[1],
                 splitted_date[2].split("T")[0])
   return classes[f"{day}/{month}"]
 
+
 @app.template_filter('toicon')
-def date2dmyhm(slot_type):
+def type2icon(slot_type):
   slot_types = {"Projection": "fa-solid fa-film",
                 "Presentation Courte": "fa-solid fa-person-chalkboard",
                 "DJ Set": "fa-solid fa-guitar",
@@ -98,9 +101,10 @@ def date2dmyhm(slot_type):
                 "Présentation": "fa-solid fa-person-chalkboard",
                 "Table Ronde": "fa-solid fa-users-line",
                 "Atelier": "fa-solid fa-screwdriver-wrench",
-                "Exposition": "fa-solid fa-palette"}
+                "Installation": "fa-solid fa-palette"}
   return slot_types[slot_type]
 
+
 # ------------------------------------------------------------------------------
 # -- Routes
 # ------------------------------------------------------------------------------
@@ -114,32 +118,38 @@ def index():
   return render_template("index.html",
                          navbar=navbar.get_from_page(page="/"))
 
+
 @app.route('/planning', methods=['GET'])
 def planning():
   slots = get_slots()
   for slot in slots.get("slots"):
     for speaker in slot.get("speakers"):
-      speaker["biography"] = get_speaker_biography(speaker.get("name"))
+      speaker["biography"] = get_speaker_biography(speaker.get("code"))
   return render_template("planning.html",
                          slots=sorted(slots.get("slots"),
                          key=lambda slot: slot.get("slot").get("start")),
-                         navbar=navbar.get_from_page(page="/planning"))
+                         navbar=navbar.get_from_page(page="/planning"),
+                         filter=["concert", "dj set", "panel discussion", "talk", "screening"])
+
 
 @app.route('/place', methods=['GET'])
 def place():
-  return render_template("index.html",
+  return render_template("place.html",
                          navbar=navbar.get_from_page(page="/place"))
 
+
 @app.route('/food', methods=['GET'])
 def food():
-  return render_template("index.html",
+  return render_template("food.html",
                          navbar=navbar.get_from_page(page="/food"))
 
+
 @app.route('/goodies', methods=['GET'])
 def goodies():
   return render_template("goodies.html",
                          navbar=navbar.get_from_page(page="/goodies"))
 
+
 @app.route('/concerts', methods=['GET'])
 def concerts():
   slots = get_slots()
@@ -149,6 +159,7 @@ def concerts():
                          navbar=navbar.get_from_page(page="/concerts"),
                          filter=["concert", "dj set"])
 
+
 @app.route('/workshops', methods=['GET'])
 def workshops():
   slots = get_slots()
@@ -158,6 +169,7 @@ def workshops():
                          navbar=navbar.get_from_page(page="/workshops"),
                          filter=["workshop"])
 
+
 @app.route('/screenings', methods=['GET'])
 def screenings():
   slots = get_slots()
@@ -167,6 +179,7 @@ def screenings():
                          navbar=navbar.get_from_page(page="/screenings"),
                          filter=["screening"])
 
+
 @app.route('/discussions', methods=['GET'])
 def discussions():
   slots = get_slots()
@@ -176,6 +189,7 @@ def discussions():
                          navbar=navbar.get_from_page(page="/discussions"),
                          filter=["panel discussion"])
 
+
 @app.route('/exhibitions', methods=['GET'])
 def exhibitions():
   slots = get_slots()
@@ -183,7 +197,8 @@ def exhibitions():
                          slots=sorted(slots.get("slots"),
                          key=lambda slot: slot.get("slot").get("start")),
                          navbar=navbar.get_from_page(page="/exhibitions"),
-                         filter=["exhibition"])
+                         filter=["installation"])
+
 
 @app.route('/talks', methods=['GET'])
 def talks():

src/thsf/static/css/elements.css

@@ -10,6 +10,7 @@ a {
 a:hover {
   color: var(--main-color);
   cursor: pointer;
+  text-shadow: -1px -1px 0 var(--alt-main-color), 1px -1px 0 var(--alt-main-color), -1px 1px 0 var(--alt-main-color), 1px 1px 0 var(--alt-main-color);
 }
 
 .content > p,

src/thsf/static/css/slot.css

@@ -64,3 +64,19 @@
 .slot_img {
   width: 18em;
 }
+
+.abstract a,
+.speaker_biography a {
+  color: var(--main-bg-color);
+}
+
+.abstract a:hover,
+.speaker_biography a:hover {
+  color: var(--alt-color);
+  text-shadow: -1px -1px 0 var(--main-bg-color), 1px -1px 0 var(--main-bg-color), -1px 1px 0 var(--main-bg-color), 1px 1px 0 var(--main-bg-color);
+}
+
+.abstract strong,
+.speaker_biography strong {
+  font-family: pfdintextcomppromedium;
+}

src/thsf/templates/base.html

@@ -64,12 +64,24 @@
           </a>
         </div>
         <div class="subpartners">
+          <a href="https://www.tvbruits.org/" target="_new">
+            <img src="{{ url_for('static', filename='images/tv-bruits.png')}}"
+                 alt="TV Bruits"
+                 title="TV Bruits"
+                 class="logo_partner">
+          </a>
           <a href="https://www.tetaneutral.net/" target="_new">
             <img src="{{ url_for('static', filename='images/tetaneutral.png')}}"
                  alt="Tetaneutral"
                  title="Tetaneutral"
                  class="logo_partner">
           </a>
+          <a href="https://www.radio-fmr.net/" target="_new">
+            <img src="{{ url_for('static', filename='images/fmr.png')}}"
+                 alt="Radio FMR"
+                 title="Radio FMR"
+                 class="logo_partner">
+          </a>
         </div>
         <div class="subpartners">
           <a href="https://clutchmag.fr/" target="_new">

src/thsf/templates/food.html

@@ -0,0 +1,14 @@
+{% extends "base.html" %}
+{% block content %}
+      <div class="logo_wrapper">
+        <img class="logo"
+            src="{{ url_for('static', filename='images/logo.svg') }}"
+            alt="THSF 2023 - S/Extraire"
+            title="THSF 2023 - S/Extraire">
+      </div>
+      <div class="content">
+        <h2>Restauration</h2>
+        <p>La restauration sur place est prévue.</p>
+        <p>Détails à venir...</p>
+      </div>
+{% endblock %}

src/thsf/templates/goodies.html

@@ -13,7 +13,7 @@
                src="{{ url_for('static', filename='images/stickers.webp') }}"
                alt="Stickers"
                title="Stickers">
-          Pour faire du <strong>Toulouse Hacker Space Factory</strong> un événement toujours différent des autres festivals <strong>votre soutien financier</strong> est nécessaire.
+          Pour faire du <strong>Toulouse Hacker Space Factory</strong> un événement toujours différent des autres festivals <a href="https://www.leetchi.com/c/thsf23" target="_new">votre soutien financier</a> est nécessaire.
         </p>
         <p class="goodies">
           <img class="right"

src/thsf/templates/index.html

@@ -16,12 +16,12 @@
         <h2>Le THSF est enfin de retour !</h2>
         <p>Nous vous invitons à passer un week-end de 3 jours à <a href="https://www.cinemas-utopia.org/toulouse/" target="_new">Utopia Borderouge Toulouse</a> pour partager avec vous nos projets, nos réflexions, nos performances, nos poésies et nos doutes sur la technologie.</p>
 
-        <p>Après avoir été soutenu et accueilli pendant 10 ans par <a href="https://vive.mixart-myrys.org/" target="_new">Mix'Art Myrys</a>, le <strong>Toulouse HackerSpace Factory</strong> se tient désormais dans un autre lieu où l'utopie nécessaire est inscrite programme.</p>
+        <p>Après avoir été soutenu et accueilli pendant 10 ans par <a href="https://vive.mixart-myrys.org/" target="_new">Mix'Art Myrys</a>, le <strong>Toulouse HackerSpace Factory</strong> se tient désormais dans un autre lieu où l'utopie nécessaire est inscrite au programme.</p>
 
-        <p>Cette année nous mettons en avant des réflexions sur <a href="https://fr.wikipedia.org/wiki/Extractivisme" target="_new">l'extractivisme des ressources</a> planétaires, des données, de la valeur travail.</p>
+        <p>Cette année nous mettons en avant des réflexions sur <a href="https://fr.wikipedia.org/wiki/Extractivisme" target="_new">l'extractivisme des ressources</a> planétaires, des données et du produit du travail.</p>
 
         <p>Comme toujours, notre objectif est de créer un festival qui poétise les bifurcations de nos idées communes et qui réinvente le sens de certains schémas imposés par notre époque. Rejoignez-nous pour une expérience enrichissante et pleine de surprises !</p>
 
-        <p>Consulter <a href="/planning">le programme du THSF</a>.</p>
+        <p>Retrouvez <a href="/planning">le programme du THSF</a> avec ses <a href="/workshops">ateliers</a>, ses <a href="/exhibitions">expositions et installations</a> mais également ses <a href="/concerts">concerts</a>, ses <a href="/projections">projections</a>, ses <a href="/talks">présentations</a> et ses <a href="/discussions">tables rondes</a>.</p>
       </div>
 {% endblock %}

src/thsf/templates/place.html

@@ -0,0 +1,34 @@
+{% extends "base.html" %}
+{% block content %}
+      <div class="logo_wrapper">
+        <img class="logo"
+            src="{{ url_for('static', filename='images/logo.svg') }}"
+            alt="THSF 2023 - S/Extraire"
+            title="THSF 2023 - S/Extraire"
+            onclick="document.getElementById('wemakeporn').style.visibility='visible';">
+        <div id="wemakeporn" class="wemakeporn"
+             onclick="document.getElementById('wemakeporn').style.visibility='hidden';">
+          <div class="wemake">WE MAKE</div>
+          <div class="porn">PORN</div>
+        </div>
+      </div>
+      <div class="content">
+        <h2>Toujours plus d'utopies</h2>
+        <p>
+          La fermeture administrative imposée à <a href="https://vive.mixart-myrys.org/" target="_new">Mix'Art Myrys</a>, terre d'accueil des 10 éditions antérieures du THSF, nous montre qu'il est plus que jamais important de continuer à bâtir, consolider et faire vivre nos utopies face à la repression systémique qu'on voudrait nous imposer.
+        </p>
+        <p>
+          Connu pour sa programmation alternative et engagée, ainsi que pour son ambiance conviviale et chaleureuse, le cinéma d'art et d'essai indépendant <a href="https://www.cinemas-utopia.org/toulouse/">Utopia Borderouge</a>, dont l'utopie est naturellement au programme, s'est proposé pour accueillir le <strong>THSF 2023</strong>.
+        </p>
+        <h3>Plan d'accès</h3>
+        <ul>
+          <li><strong>Adresse:</strong> 59, avenue Maurice Bourgès-Maunoury, Les Izards - Toulouse</li>
+          <li><strong>GPS:</strong> 43°38'22.7"N 1°27'07.3"E</li>
+          <li><strong>Métro:</strong> Ligne B - Borderouge</li>
+          <li><strong>Velooz:</strong> Station 175 - Métro Borderouge - Maunoury</li>
+        </ul>
+        <div class="map">
+          <iframe width="425" height="350" frameborder="0" scrolling="no" marginheight="0" marginwidth="0" src="https://www.openstreetmap.org/export/embed.html?bbox=1.4502596855163576%2C43.63879667815726%2C1.4538002014160158%2C43.64046408342326&amp;layer=mapnik&amp;marker=43.639631357124614%2C1.4520299434661865" style="border: 1px solid black"></iframe><br/><small><a href="https://www.openstreetmap.org/?mlat=43.63963&amp;mlon=1.45203#map=19/43.63963/1.45203">Afficher une carte plus grande</a></small>
+        </div>
+      </div>
+{% endblock %}

src/thsf/templates/slot.html

@@ -6,6 +6,7 @@
       <span class="title">{{slot.title}}</span>
     </div>
     <div class="slot_info">
+      {% if slot.slot.room.fr != "Workshops" %}
       <div class="start">
         <i class="fa-solid fa-caret-right"></i>
         {{slot.slot.start | date2dmyhm}} - {{slot.duration}} minutes ({{slot.content_locale | capitalize}})
@@ -14,6 +15,7 @@
         <i class="fa-solid fa-caret-right"></i>
         {{slot.slot.room.fr}}
       </div>
+      {% endif %}
       <div class="speakers">
         {% for speaker in slot.speakers %}
           <div class="speaker">
@@ -33,9 +35,7 @@
               {% endif %}
               {% if speaker.biography %}
               <div class="speaker_biography">
-                <div class="speaker_biography">
-                  {{ speaker.biography }}
-                </div>
+                {{ speaker.biography | safe }}
               </div>
               {% endif %}
             </div>
@@ -52,10 +52,10 @@
                 title="{{slot.name}}">
           {% endif %}
           {% if slot.abstract %}
-          <p>{{slot.abstract}}</p>
+          <p>{{slot.abstract | safe }}</p>
           {% endif %}
           {% if slot.description %}
-          <p>{{slot.description}}</p>
+          <p>{{slot.description | safe }}</p>
           {% endif %}
         </div>
       </div>

thsf.Dockerfile

@@ -0,0 +1,15 @@
+ARG PRETALX_HOSTS_ENTRY
+FROM python:3.9.16-bullseye as thsf_base
+RUN apt-get update -y && \
+    apt-get install -y bash make python3-pip && \
+    useradd -m -d /home/thsf -s /bin/bash thsf
+
+from thsf_base as thsf_build
+COPY . /home/thsf/
+RUN chown -R thsf:thsf /home/thsf/
+USER thsf
+WORKDIR /home/thsf/
+
+from thsf_build
+RUN	make install
+CMD ["make", "run"]

thsf.net.code-workspace

@@ -0,0 +1,8 @@
+{
+	"folders": [
+		{
+			"path": "."
+		}
+	],
+	"settings": {}
+}