/*	
	combine.c			others effects
	=========			--------------

	made by Thierry Boudet, aka "Oulala", aka "Tonton Th".

	ces fonctions combinent de diverses façons deux images
	de memes dimensions. on pourra, par exemple, les utiliser
	pour comparer deux traitements.
*/

#include  <stdio.h>
#include  <stdlib.h>
#include  <math.h>

#include  "../tthimage.h"

#ifndef min
#define min(a,b) ((a)<(b)?(a):(b))
#define max(a,b) ((a)>(b)?(a):(b))
#endif

/*::------------------------------------------------------------------::*/
/*
 *	le paramètre 'zak' n'est pas utilisé et doit être mis à 0
 */
int Image_combine_lines(Image_Desc *s1, Image_Desc *s2, Image_Desc *d,
			int sy, int oy, int zak)
{
int	foo, x, y, my, r, g, b;

if (sy == 0) {
	fprintf(stderr, "Combine Lines: sy is zer0 and zak is %d\n", zak);
	return DIVISOR_IS_ZERO;
	}
if ( (foo=Image_compare_desc(s1, s2)) ) {
	fprintf(stderr, "Combine Lines: sources are differents (%d)\n", foo);
	return foo;
	}

#if DEBUG_LEVEL
fprintf(stderr, "Combine lines:  %d %d\n", sy, oy);
#endif
for (y=0; y<s1->height; y++) {
	my = (y+oy) / sy;
	for (x=0; x<s1->width; x++) {
		if ( my&1 ) {
			r = (s1->Rpix[y])[x];
			g = (s1->Gpix[y])[x];
			b = (s1->Bpix[y])[x];
			}
		else	{
			r = (s2->Rpix[y])[x];
			g = (s2->Gpix[y])[x];
			b = (s2->Bpix[y])[x];
			}

		(d->Rpix[y])[x] = r;
		(d->Gpix[y])[x] = g;
		(d->Bpix[y])[x] = b;
		}
	}

return OLL_KORRECT;
}
/*::------------------------------------------------------------------::*/
/*
 *	le paramètre 'zak' n'est pas utilisé et doit être mis à 0
 */
int Image_combine_columns(Image_Desc *s1, Image_Desc *s2, Image_Desc *d,
			int sx, int ox, int zak)
{
int	foo, x, y, mx, r, g, b;

if (zak) {
	fprintf(stderr, "in %s, zak is not 0\n", __func__);
	}

if (sx == 0) {
	fprintf(stderr, "Combine Columns: sx is zer0\n");
	return DIVISOR_IS_ZERO;
	}
if ( (foo=Image_compare_desc(s1, s2)) ) {
	fprintf(stderr, "Combine Lines: sources are differents (%d)\n", foo);
	return foo;
	}

#if DEBUG_LEVEL
fprintf(stderr, "Combine columns:  %d %d\n", sx, ox);
#endif

for (y=0; y<s1->height; y++) {
	for (x=0; x<s1->width; x++) {
		mx = (x+ox) / sx;
		if ( mx & 1 ) {
			r = (s1->Rpix[y])[x];
			g = (s1->Gpix[y])[x];
			b = (s1->Bpix[y])[x];
			}
		else	{
			r = (s2->Rpix[y])[x];
			g = (s2->Gpix[y])[x];
			b = (s2->Bpix[y])[x];
			}
		(d->Rpix[y])[x] = r;
		(d->Gpix[y])[x] = g;
		(d->Bpix[y])[x] = b;
		}
	}

d->modified = 1;

return OLL_KORRECT;
}
/*::------------------------------------------------------------------::*/
/*
 *	28 Jan 2001: pourquoi ne pas introduire un calcul automatique
 *		     des coefficients ox & oy pour obtenir le centrage ?
 *	
 *	'zak' parameter is not used, and must be 0.
 */
int Image_combine_checker(Image_Desc *s1, Image_Desc *s2, Image_Desc *d,
				int sx, int sy, int ox, int oy, int zak)
{
int	foo, r, g, b;
int	x, y, mx, my;

#if DEBUG_LEVEL
fprintf(stderr, "Checker (%p, %p) -> %p  [%d,%d] [%d,%d]\n", 
			s1, s2, d, sx, sy, ox, oy);
#endif

if (zak) {
	fprintf(stderr, "%s: 'zak' = %d, must be 0.\n", __func__, zak);
	}

if ( sx==0 || sy==0 ) {
	fprintf(stderr, "Combine Checker: sx or sy is Zero\n");
	return DIVISOR_IS_ZERO;
	}

if ( (foo=Image_compare_desc(s1, s2)) ) {
	fprintf(stderr, "Combine Checker: sources are differents (%d)\n", foo);
	return foo;
	}

for (y=0; y<s1->height; y++) {
	my = (y+oy) / sy;
	for (x=0; x<s1->width; x++) {
		mx = (x+ox) / sx;
		if ( (mx&1) != (my&1) )	{
			r = (s1->Rpix[y])[x];
			g = (s1->Gpix[y])[x];
			b = (s1->Bpix[y])[x];
			}
		else	{
			r = (s2->Rpix[y])[x];
			g = (s2->Gpix[y])[x];
			b = (s2->Bpix[y])[x];
			}

		(d->Rpix[y])[x] = r;
		(d->Gpix[y])[x] = g;
		(d->Bpix[y])[x] = b;
		}
	}

return 0;
}
/*::------------------------------------------------------------------::*/
/*
 *	houba, celle-ci va me donner du mal, et on peut la 
 *	considerer comme pas finie, c'est a dire, entre autre,
 *	que le prototype risque de changer.
 *
 *	Toutes les suggestions sont les bienvenues, surtout si
 *	elles viennent de glandeur06 et son UltraSparc.
 *
 *	Tiens, le parametre 'yo' ne sert a rien ?
 */
int Image_combine_cercle_flou(Image_Desc *s1, Image_Desc *s2, Image_Desc *d, int yo)
{
int	foo;
int	xcenter, ycenter;
int	x, y, r1, v1, b1, r2, b2, v2;
float	fx2, fy2, dmax, coef;

if ( (foo=Image_compare_desc(s1, s2)) ) {
	fprintf(stderr, "Combine Cercle Flou: differents sources (%d)\n", foo);
	return foo;
	}

if ( (foo=Image_compare_desc(s1, d)) ) {
	fprintf(stderr, "Combine Cercle Flou: source != dest (%d)\n", foo);
	return foo;
	}

xcenter = (s1->width) / 2;
ycenter = (s1->height) / 2;
dmax = (float)(xcenter*xcenter) + (float)(ycenter*ycenter);
dmax /= 1.732;

#if DEBUG_LEVEL
fprintf(stderr, "\tcentre: %d, %d\n", xcenter, ycenter);
fprintf(stderr, "\tdmax: %f\n", dmax);
fflush(stderr);		/* vraiment necessaire ? */
#endif

for (y=0; y<s1->height; y++) {
	fy2 = (float)((y-ycenter)*(y-ycenter));
	for (x=0; x<s1->width; x++) {
		fx2 = (float)((x-xcenter)*(x-xcenter));

		r1 = (s1->Rpix[y])[x];
		v1 = (s1->Gpix[y])[x];
		b1 = (s1->Bpix[y])[x];

		r2 = (s2->Rpix[y])[x];
		v2 = (s2->Gpix[y])[x];
		b2 = (s2->Bpix[y])[x];

		coef = (fx2+fy2)/dmax;
		if (1==yo) {
			coef = cos(coef);
			}

		if (coef < 0.0)		coef = 0.0;
		if (coef > 1.0)		coef = 1.0;

		(d->Rpix[y])[x] = (int)(r1*(1.0-coef)+r2*coef);
		(d->Gpix[y])[x] = (int)(v1*(1.0-coef)+v2*coef);
		(d->Bpix[y])[x] = (int)(b1*(1.0-coef)+b2*coef);

		}
#if DEBUG_LEVEL
	fprintf(stderr, "x %4d y %4d c %f\n", x, y, coef);
#endif
	}

return OLL_KORRECT;
}
/*::------------------------------------------------------------------::*/
/*
 *	le flag 'yo' decide quelle image sera en haut à droite.
 *	les paramètres p1 & p2 ne sont pas utilisés.
 */
int Image_combine_diagonale(Image_Desc *s1, Image_Desc *s2, Image_Desc *d,
				int yo, int p1, int p2)
{
int	foo;
int	x, y, r, g, b;
int	vertical, offset;

if ( p1 || p2 ) {
	fprintf(stderr, "in %s bad p1 %d or bad p2 %d\n", __func__, p1, p2);
	}

if ( (foo=Image_compare_desc(s1, s2)) ) {
	fprintf(stderr, "%s: differents sources (%d)\n", __func__, foo);
	return foo;
	}

if (s1->height > s1->width) {
	vertical = 1;
	offset = (s1->height - s1->width) / 2;
	}
else	{
	vertical = 0;
	offset = (s1->width - s1->height) / 2;
	}

for (y=0; y<s1->height; y++) {
	for (x=0; x<s1->width; x++) {
		if ( vertical )	{
			if (x > (y-offset))	foo=1;
			else			foo=0;
			}
		else	{ 
			if ((x-offset) > y)	foo=1;
			else			foo=0;
			}

		foo = yo ? !foo : foo;			/* strange hack */

		if (foo) {
			r = (s1->Rpix[y])[x];
			g = (s1->Gpix[y])[x];
			b = (s1->Bpix[y])[x];
			}
		else	{
			r = (s2->Rpix[y])[x];
			g = (s2->Gpix[y])[x];
			b = (s2->Bpix[y])[x];
			}

		(d->Rpix[y])[x] = r;
		(d->Gpix[y])[x] = g;
		(d->Bpix[y])[x] = b;
		}
	}
/*
 * 30 sept 2008 : est-ce que cette fonction a subi un bon fuzzing ?
 */
return OLL_KORRECT;
}
/*::------------------------------------------------------------------::*/
/*	15 Nov 2000

	we put in the destination image the min/max value
	of the RGB componants.
 */
int Image_combine_minmax(Image_Desc *s1, Image_Desc *s2, Image_Desc *d, int flg)
{
int	foo, x, y, r, g, b;
int	r1, r2, g1, g2, b1, b2;

if ( (foo=Image_compare_desc(s1, s2)) ) {
	fprintf(stderr, "Combine MinMax: differents sources (%d)\n", foo);
	return foo;
	}

for (y=0; y<s1->height; y++) {
	for (x=0; x<s1->width; x++) {
		r1 = (s1->Rpix[y])[x];
		g1 = (s1->Gpix[y])[x];
		b1 = (s1->Bpix[y])[x];

		r2 = (s2->Rpix[y])[x];
		g2 = (s2->Gpix[y])[x];
		b2 = (s2->Bpix[y])[x];

		if (flg) {
			r = max(r1, r2);
			g = max(g1, g2);
			b = max(b1, b2);
			}
		else
			{
			r = min(r1, r2);
			g = min(g1, g2);
			b = min(b1, b2);
			}
		(d->Rpix[y])[x] = r;
		(d->Gpix[y])[x] = g;
		(d->Bpix[y])[x] = b;
		}
	}

return OLL_KORRECT;
}
/*::------------------------------------------------------------------::*/
/*
 *   fonction faite pour le finisseur de DBvsEE
 *
 *	6 oct 2001: une version qui permettrait de spécifier les
 *		seuils en r,g et b serait assez pratique aussi.
 */
int Image_combine_if_not_black(Image_Desc *s1, Image_Desc *s2, Image_Desc *d)
{
int	foo, x, y, r, g, b;

if ( (foo=Image_compare_desc(s1, s2)) )	{
	fprintf(stderr, "Combine If Not Black: differents sources (%d)\n", foo);
	return foo;
	}

for (y=0; y<s1->height; y++) {
	for (x=0; x<s1->width; x++) {
		/* XXX Image_getRGB(s1, x, y, &r, &g, &b); */
		r = (s1->Rpix[y])[x];
		g = (s1->Gpix[y])[x];
		b = (s1->Bpix[y])[x];

		if ( r==0 && g==0 && b==0 ) {
			/* XXX Image_getRGB(s2, x, y, &r, &g, &b); */
			r = (s2->Rpix[y])[x];
			g = (s2->Gpix[y])[x];
			b = (s2->Bpix[y])[x];
			}

		/*Image_plotRGB(d, x, y, r, g, b);*/
		(d->Rpix[y])[x] = r;
		(d->Gpix[y])[x] = g;
		(d->Bpix[y])[x] = b;
		}
	}

return FUNC_IS_BETA;		/* XXX c'est pas du OLL_KORRECT ? */
}
/*::------------------------------------------------------------------::*/
/*
 *	gni ?
 */
int Image_poke_2zones(Image_Desc *src, Image_Desc *ia, Image_Desc *ib,
				   Image_Rect *za, Image_Rect *zb,
				  Image_Desc *dst)
{
int		foo;
/* Image_Rect	rect; */

if ( (foo=Image_compare_desc(src, dst)) ) {
	fprintf(stderr, "Poke 2 Zone: src & dst: %d %s\n", 
					foo, Image_err2str(foo));
	return foo;
	}

Image_copy(src, dst);

fprintf(stderr, "Image Poke 2 Zones: ben, ya rien...\n");

return FUNC_NOT_FINISH;
}
/*::------------------------------------------------------------------::*/