OFFOK/offok/offok.ino

/*--------------------------------------------------------------*/
/*  Projet: OFFOK                                               */
/*  File  : offok.ino                                           */
/*  Author: ukjent@HPP                                 04/05/21 */
/*--------------------------------------------------------------*/
/*
This gets IR codes send by a TvBeGone & displays results on OLED
02/14/21: First proof of IR sensor & Oled
02/17/21: Moved to new lib U8g2lib, works OK on UNO
04/05/21: OK on NANO
04/22/21: new logo, display hex code, test piezo
TODO: adjust delays, play nice ringstones, use protothreads ?
*/
#include <Arduino.h>
/*
    Graphics settings  
*/
#include <U8g2lib.h>
#ifdef U8X8_HAVE_HW_SPI
#include <SPI.h>
#endif
#ifdef U8X8_HAVE_HW_I2C
#include <Wire.h>
#endif
U8G2_SH1106_128X64_NONAME_1_HW_I2C u8g2(U8G2_R0, /* reset=*/ U8X8_PIN_NONE);
#include "logo.h"  // Home logo :-)
/*
    IR settings  
*/
#include <IRremote.h>
/*    the function tone() uses timer2 by default, so does IRremote lib.
 *    File IRremoteBoardDefs.h, in lib IRremote define wich timer to use */
// #define IR_USE_TIMER1   // use Timer 1 instead of Timer 2
const int RECV_PIN = 2;
IRrecv irrecv(RECV_PIN);
decode_results results;

//#define DEBUG
#define NBCODES 130     // mininum codes to qualify a kit
#define ACQUINONE 4000  // maximum time allowed without signal in millisecond
/*
 *    Sound settings
 */
#define PIEZO  7
unsigned int sounds[] = {262,294,330,349,392,440,494}; // just to test piezo
#define BEATTIME  400

void drawLogo(void) {  // draw the logo screen
  u8g2.firstPage();
  do {
    u8g2.drawXBMP( 0, 0, logo_width, logo_height, logo_bits);
  } while ( u8g2.nextPage() );
}

void setup(void) { 
  noTone(PIEZO); // WIP musical intro needed :-)
  u8g2.begin(); 
  drawLogo();
#ifdef DEBUG   
  Serial.begin(9600);
#endif  
  irrecv.enableIRIn(); // Start the receiver
  delay(1000); 
}

void showTrace();

void constratSlope(int depart, int aim, int inc, int lag) { // Dimmer slope up or down
  int i=depart; 
  if (inc > 0) u8g2.setPowerSave(0);
  do {
    i=constrain(i,0,254);
    u8g2.setContrast(i);
    delay (lag);
    i=i+inc;
  } while (i != aim);
  if (inc < 0) u8g2.setPowerSave(1);
}
void showResult(int val){
  char l1[8]; 
  sprintf(l1, "%4d",val); 
  u8g2.firstPage();
  do {
    u8g2.setFont(u8g2_font_profont17_tr);
    u8g2.drawStr(10,24, "Total recus :");
    u8g2.setFont(u8g2_font_profont22_tr);
    u8g2.drawStr(30,54, l1);
  } while ( u8g2.nextPage() );
  for (int i=0; i<=6; i++) {
   tone(PIEZO,sounds[i]);
   delay(BEATTIME);
   noTone(PIEZO);
  }   
}
void showResultOLD(int val){
 char l1[16],l2[16]; 
  if (val < NBCODES) {
    sprintf(l1, "C'est KO :-(") ;
    sprintf(l2, "    DESOLE");     
  } else {
    sprintf(l1, "C'est OK :-)") ;
    sprintf(l2, "FELICITATION");  
  }
  u8g2.firstPage();
  do {
    u8g2.setFont(u8g2_font_fub14_tr);
    u8g2.drawStr(4,24, l1);
    u8g2.setFont(u8g2_font_fub11_tr);
    u8g2.drawStr(8,54, l2);
  } while ( u8g2.nextPage() );
}

void showCode(unsigned long val) {
  char buf[16];
  u8g2.firstPage();
  do {
    u8g2.setFont(u8g2_font_profont17_tr);
    u8g2.drawStr(16,24, "Code recu :");
    sprintf(buf, "%08X", val ) ;
    u8g2.setFont(u8g2_font_profont22_tr);
    u8g2.drawStr(16,54,buf);
  } while ( u8g2.nextPage() );  
}

void showCount(int val) {
  char buf[16];
    u8g2.firstPage();
    do {
      u8g2.setFont(u8g2_font_fub14_tr);
      u8g2.drawStr(12,28,"Codes lus :");
      sprintf(buf, "%3d", val ) ;
      u8g2.setFont(u8g2_font_fub20_tr);
      u8g2.drawStr(40,60,buf);
    } while ( u8g2.nextPage() );  
}


// Global parameters
int cl=0; unsigned long lastReading=0, currentt=0;

void loop(void) {
  noTone(PIEZO);
  if (irrecv.decode(&results)) { // if we keep getting signals, it is running
    lastReading=millis();
    cl += 1;
    showCode(results.value); //showCount(cl);
    irrecv.resume();  
  } 
  else    // got no more reading
  {       // if we keep getting nothing, then it is over  
    currentt = millis();
    if ((lastReading + ACQUINONE < currentt) && ( cl > 0)) { // lastReading too old
      showTrace();
      showResult(cl); cl = 0; 
      constratSlope(255, 0, -1, 50);
      delay(3000);
      drawLogo(); 
      constratSlope(0, 255, 1, 20);
    }
  }
 
} // loop

void showTrace() { 
#ifdef DEBUG  
  Serial.print("OK cl : ");
  Serial.print(cl);
  Serial.print("  currentt : ");
  Serial.print(currentt);
  Serial.print(" lastReading : ");
  Serial.println(lastReading); 
#endif   
}